Vermont-casting Gas Grill User Manual download pdf (Page 16)

8. Find the single loose black igniter wire

under the Grill Head Assembly, near where

the side burner hose is ran through the

collar.

Run the wire up through the mounting tab

and connect the end to the side burner

igniter electrode.

Assembly Step 6 - Continued

9. Attach the Match Holder Chain to the same

tab by crimping the s-hook end of the chain

through the wire hole. The Match Holder is

used to hold a match for lighting the burner

inside the grill tub. (Optional match-lighting

method - see “Lighting Instructions” on

pages 23-24.)

6. From the front side of the side table, insert

and tighten the bolts from hardware pack E

to the control valve as shown.

There are 2 different sized bolts to ensure

that the valve is properly oriented.

7. Press the knob onto the control valve stem

as shown. Make sure the keyed shaft is

properly seated - do not force the knob into

place.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

No comments

Vermont-casting Gas Grill User Manual Page 16